About Gesture Controlled Robotics Workshop

A Gesture Controlled robotics is a kind of robot which can be controlled by your hand gestures not by old buttons. You just need to wear a small transmitting device in your hand which included an acceleration meter. This will transmit an appropriate command to the robot so that it can do whatever we want. The transmitting device included a comparator IC for analog to digital conversion and an encoder IC(HT12E) which is use to encode the four bit data and then it will transmit by an RF Transmitter module.

Requirements for Zonal Center

  • Seminar hall/classroom having the enough capacity to conduct hands-on-session for all participants.
  • Good Quality public address system ideally two cordless mikes will be required.
  • Projector/ Screen along with black/white board for teaching and presentation purposes.
  • One small stereo jack cord connect to laptop for its sound system.
  • This Zonal center can only be arranged for a minimum of 60 students

Certificate Distribution

  • Certificate of Participation from RoBoFeast-2017, Cognizance IIT-Roorkee to each participant
  • Certificate of Coordination from RoBoFeast-2017, Cognizance IIT-Roorkee for all of the coordinators
  • Zonal Winners will participate in Final Rounds on March 2017 at IIT-Roorkee and Get Certificate of Merit Student from ROBOFEAST-2017, Cognizance IIT-Roorkee to each Merit Student.

2-Days Mobile Controlled Robotics Course Contents

1st Day 1st session

Introduction to Robotics

Basics of Robot Electronics:

  • Basic Electronic Components
  • Fundamental Electrical Concepts
  • Sensors
  • Operational Amplifier
  • Integrating Circuit
  • Interfacing of Sensors
  • Motors and Controlling Circuit
  • Interfacing of Motors
  • DTMF (Dual Tone Multiple Frequency)

1st Day 2nd session

Introduction to Microcontrollers

This session would deal with the basics of Microcontroller. The focus will be on the AVR series micro controller- ATMega8, which is one of the most powerful and widely used 8 bit micro controller.

  • What is Microcontroller?
  • Difference between Microcontroller and Microprocessor.
  • Microcontroller Architecture and Interfacing.
  • How can we use Microcontroller in our Own Circuits?

Introduction to Programming Languages

  • Assembly vs Embedded C.
  • Microcontroller Programming using ‘Embedded C’.

Discussion on Different Algorithms

  • Line Following Robot
  • Edge Avoiding Robot
  • Obstacle Avoider Robot
  • Wall Following Robot
  • Sound Operated Robot
  • Light Searching Robot
  • Mobile Controlled Robot

2nd Day 1st session

Installation of Software and Debugging

  • Writing your First ‘Embedded C’ Program in AVR Studio.
  • Program Compilation and Debugging.
  • Loading Compiled ‘C’ Program into Microcontroller

Assembling the kit

Assembling plays a major role that deals with the mechanical section of Robotics including mounting of components and mechanical stability.

Generating different LED Patterns

Development of Line Following Robot

As the name suggests, Line Follower Robot is well programmed mobile machine that can follow a path visible like Black Line on White Surface or vice versa. A simple fuzzy logic will do the job of maneuvering the robot according to the Line Following Algorithm discussed in session 2.

Development of Edge Avoiding Robot

Edge Avoiding Robot is a mobile machine that senses the presence & absence of surface below it and avoids the absence of the surface using the Edge Avoiding Algorithm discussed in session 2.

Generating different LED Patterns using Mobile Phone

Development of Mobile Controlled Robot

A Mobile Controlled Robot is a mobile device that provides wide-range of wireless control ability to your robot sitting in one place, until and unless your mobile phone gets out of signal.

2nd Day 2nd session

Zonal Competition

After the hand on theory and practical experience from the workshop, Zonal Round Competition will be conducted for the participants.

Certificate Distribution

Certificate of Merit will be provided to all Zonal Round Winners and Certificate of Participation will be provided to all the Zonal Round Participants (Excluding Merit Participants).

1st Stage (To be held at Zonal Centers)

  • Competitions will be held at different Zonal centers through workshop on Robotics.
  • All the participants who want to participate in National level Robotics Championship are required to attend 2-Days Robotics workshop at any zonal center

2nd Stage (Prelims rounds to be held at zonal center):

  • Just after robotics workshop a Prelims Rounds of Robotics championship will held at zonal center.
  • Winners will be awarded with Certificate of Merit and will be eligible to participate in Final Rounds which will be held on March 2017 at IIT-Roorkee

3rd Stage (FINAL Round to be held at IIT-Roorkee):

  • Winners of zonal centers will be called to participate in the biggest final round of Robotics championship will held on march 2017 at IIT-Roorkee
  • Top 3 Teams will be awarded as winners of The Robotics championship 2017 & will be awarded & honored by Cognizance,IIT-Roorkee.

Gesture Controlled Robotics Kit Components

  • 1x (ATmega8)
  • 1x Triple Axis Accelerometer- ADXL335
  • 1x (16×2 LCD))
  • 1x (USB Connector cable)
  • 1x (High Quality Plastic Chassis Board)
  • 1x (Screw driver)
  • 1x (Ball Caster wheel)
  • 2x (IR Based Digital Sensors)
  • 4x (Support Studs)
  • 1 Pair wheel 76mm Diameter
  • 1 Pair D.C Plastic gear motors
  • 1x CD
  • Codes
  • Datasheets
  • Drivers
  • PPTs
  • Software
  • Tutorials
  • User Manual
  • Other required Tools and accessories etc.

iot

Benefits to the participants of RoBoFeast-2017

  • Learn & Interact with renowned Industry Experts.
  • Hands on Mobile Controlled robotics Experience.
  • Free Mobile Controlled robotics kit to each team of 5 members.
  • Top 3 member will be awarded with merit certificate & are required to participate in Final Rounds on march 2017 at IIT-Roorkee
  • Certificate of Participation to all Participants from Cognizance, IIT-Roorkee

Benefits of association with us

  • Name and Logo including website link will be published on our official website mentioning that “You are our Official Zonal Partner”.
  • Authorized Team will visit your College to organize the entire event.
  • An email will be sent to more than 1 lack users of our web partners about your college publicity.
  • Posters and Flexes will be sent to you for effective regional publicity.
  • All India publicity through SMS will also be done.

Requirements for Zonal Center

  • Seminar hall/classroom having the enough capacity to conduct hands-on-session for all participants.
  • Good Quality public address system ideally two cordless mikes will be required.
  • Projector/ Screen along with black/white board for teaching and presentation purposes.
  • One small stereo jack cord connects to laptop for its sound system.
  • Hospitality (2 days) for a Robotics expert.  2-Days workshop can only be arranged for a minimum of 60 Student

Workshop Duration

The Duration of the Workshop will be of 2 Days (7-8 hrs. each day)

Who Could Attend?

All engineering students & hobbyist of Robotics workshop can attend this workshop, as Robotics has become the backbone of all the industry needs…

Registration charges (Training + Free kit)

INR.1200/-per participant only

  • Free Mobile Controlled Robotics Kit in a Team (5 members).
  • The fee includes workshop training, certification, and Event registration.

Please be free to contact us for any kind of discussions related to ROBOFEAST-2017
Md.Nafish Dept. of Education & Training Development NWTP-2017 | AppsFluxus-2017 | RoboFeast-2017

Contact No. +91-7053133032 | 011-65544707 Email nafish@finlandlabs.com | http://finlandlabs.com/nstp/