2-Days IOT workshop Certificates

Certificate of Participation from ROBOFEAST-2017,Cognizance IIT-Roorkee.
Certificate of merit from ROBOFEAST-2017,Cognizance IIT Roorkee.
Certificate of Coordination from ROBOFEAST-2017, Cognizance IIT-Roorkee.

2-Days Mobile Controlled Robotics Course Contents

1st Day 1st session

Introduction to Robotics

Basics of Robot Electronics:

Basic Electronic Components
Fundamental Electrical Concepts
Operational Amplifier
Integrating Circuit
Interfacing of Sensors
Motors and Controlling Circuit
Interfacing of Motors
DTMF (Dual Tone Multiple Frequency)
1st Day 2nd session

Introduction to Microcontrollers

This session would deal with the basics of Microcontroller. The focus will be on the AVR series micro controller- ATMega8, which is one of the most powerful and widely used 8 bit micro controller.

What is Microcontroller?
Difference between Microcontroller and Microprocessor.
Microcontroller Architecture and Interfacing.
How can we use Microcontroller in our Own Circuits?
Introduction to Programming Languages

Assembly vs Embedded C.
Microcontroller Programming using ‘Embedded C’.
Discussion on Different Algorithms

Line Following Robot
Edge Avoiding Robot
Obstacle Avoider Robot
Wall Following Robot
Sound Operated Robot
Light Searching Robot
Mobile Controlled Robot
2nd Day 1st session

Installation of Software and Debugging

Writing your First ‘Embedded C’ Program in AVR Studio.
Program Compilation and Debugging.
Loading Compiled ‘C’ Program into Microcontroller
Assembling the kit

Assembling plays a major role that deals with the mechanical section of Robotics including mounting of components and mechanical stability.

Generating different LED Patterns

Development of Line Following Robot

As the name suggests, Line Follower Robot is well programmed mobile machine that can follow a path visible like Black Line on White Surface or vice versa. A simple fuzzy logic will do the job of maneuvering the robot according to the Line Following Algorithm discussed in session 2.

Development of Edge Avoiding Robot

Edge Avoiding Robot is a mobile machine that senses the presence & absence of surface below it and avoids the absence of the surface using the Edge Avoiding Algorithm discussed in session 2.

Generating different LED Patterns using Mobile Phone

Development of Mobile Controlled Robot

A Mobile Controlled Robot is a mobile device that provides wide-range of wireless control ability to your robot sitting in one place, until and unless your mobile phone gets out of signal.

2nd Day 2nd session

Zonal Competition

After the hand on theory and practical experience from the workshop, Zonal Round Competition will be conducted for the participants.

Certificate Distribution

Certificate of Merit will be provided to all Zonal Round Winners and Certificate of Participation will be provided to all the Zonal Round Participants (Excluding Merit Participants).

1st Stage (To be held at Zonal Centers)

Competitions will be held at different Zonal centers through workshop on Robotics.
All the participants who want to participate in National level Robotics Championship are required to attend 2-Days Robotics workshop at any zonal center
2nd Stage (Prelims rounds to be held at zonal center):

Just after robotics workshop a Prelims Rounds of Robotics championship will held at zonal center.
Winners will be awarded with Certificate of Merit and will be eligible to participate in Final Rounds which will be held on March 2017 at IIT-Roorkee
3rd Stage (FINAL Round to be held at IIT-Roorkee):

Winners of zonal centers will be called to participate in the biggest final round of Robotics championship will held on march 2017 at IIT-Roorkee
Top 3 Teams will be awarded as winners of The Robotics championship 2017 & will be awarded & honored by Cognizance,IIT-Roorkee.

KIT Component for Mobile Robotics Workshop:

1. The controller board (Revert Technology Board)
Built around the popular Atmel AVR microcontroller ATmega 8 with ample of program memory (8Kb)
2 channels of motor controller Board, capable of driving 2 dc motors

On board power regulator IC
On board power supply socket
Onboard program RESET switch
Atmega8 Microcontroller
USB Programmable
USB Powered (only for programming)
2. USB Cable
3. Chassis:

Chasis cum Motor Driver Circuit
Driven by 2 geared motors and 2 Castor Bullet
4. Motors: 2 gears motors (BO-2 Type)
5. A pair of Wheels with rubber
6. Sensors: a Pair of IR Sensor
7. Tool: Screw Driver
8. DTMF Decoder: DTMF decoder module with 3.5mm audio pin
9. Software


Benefits to the participants of RoBoFeast-2017

Learn & Interact with renowned Industry Experts.
Hands on Mobile Controlled robotics Experience.
Free Mobile Controlled robotics kit to each team of 5 members.
Top 3 member will be awarded with merit certificate & are required to participate in Final Rounds on march 2017 at IIT-Roorkee
Certificate of Participation to all Participants from Cognizance, IIT-Roorkee
Benefits of association with us

Name and Logo including website link will be published on our official website mentioning that “You are our Official Zonal Partner”.
Authorized Team will visit your College to organize the entire event.
An email will be sent to more than 1 lack users of our web partners about your college publicity.
Posters and Flexes will be sent to you for effective regional publicity.
All India publicity through SMS will also be done.
Requirements for Zonal Center

Seminar hall/classroom having the enough capacity to conduct hands-on-session for all participants.
Good Quality public address system ideally two cordless mikes will be required.
Projector/ Screen along with black/white board for teaching and presentation purposes.
One small stereo jack cord connects to laptop for its sound system.
Hospitality (2 days) for a Robotics expert.  2-Days workshop can only be arranged for a minimum of 60 Student
Workshop Duration

The Duration of the Workshop will be of 2 Days (7-8 hrs. each day)

Who Could Attend?

All engineering students & hobbyist of Robotics workshop can attend this workshop, as Robotics has become the backbone of all the industry needs…

Registration charges (Training + Free kit)

INR.1200/-per participant only

Free Mobile Controlled Robotics Kit in a Team (5 members).
The fee includes workshop training, certification, and Event registration.
Please be free to contact us for any kind of discussions related to ROBOFEAST-2017
Md.Nafish Dept. of Education & Training Development NWTP-2017 | AppsFluxus-2017 | RoboFeast-2017

Contact No. +91-7053133032 | 011-65544707 Email nafish@finlandlabs.com | http://finlandlabs.com/nstp/